Filter
Top Products
Voice Storage and Configuration with the Telset 6-8
B1272M001
BARNETT ENGINEERING LTD. ProTalk Cv2
Control Timer Scale
Cv2: “Control Timer is seconds”
You:
Change timer scale to seconds
Change timer scale to minutes
Exit to Main Menu
Accept timer scale and advance to Control Timer Value
Control Timer Value
Cv2: “Control Timer is 01 seconds”
You:
Change timer to 5 seconds (range: 0-6 sec, 1-255 min)
Exit to Main Menu
Accept timer value and return to Control Output Menu
Reset Database (Basic and Advanced mode)
Cv2: “Enter Empty Code"
You:
Confirm reset command
Exit to Main Menu
Exit to Main Menu
Cellphone Status (Basic and Advanced mode)
see Section 9 for interpretation
Received Signal Strength (RSSI)
Cv2: “Code One is 8, 8, 8, 8, ..." 0=very poor, 15=very good
You:
Exit to Main Menu
Advance to Query Service
Service
Cv2: “Code Two is 3”
You:
Exit to Main Menu
Advance to Query SID
SID
Cv2: “Code Three is 1 2 3 4 5"
You:
Exit to Main Menu
Advance to Query NID
NID
Cv2: “Code Four is 1 2 3"
You:
Exit to Main Menu
Advance to Query Transceiver State