Filter
Top Products
Configuration using the PC 4-20
B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2
keeping the rest of the configuration in basic mode.
Insert - Insert a new phone number at the highlighted location
Delete - Delete the phone number at the highlighted location
Edit - Modify the phone number at the highlighted location
Advanced - View or edit the directory with the Advanced editor
Acknowledge Code
The Acknowledge Code is a 1 to 7 digit DTMF string that is used to acknowledge the
directory and stop alarm transmission until a new alarm is detected. Each directory can
have a unique Acknowledge Code, or they can both use the same code in order to be
acknowledged simultaneously. In special cases where it is not desirable to have the
Acknowledge Code permanently silence the alarm condition, append the digit ‘#’ when
you send the code and the Temporary Acknowledge Time in the General section will be
used as an override.
Default Acknowledge Code: an empty text string.
Interrogate Code
The Interrogate Code is a 1 to 7 digit DTMF string that is used to make the Cv2 announce
the condition of alarms using the directory. Each directory can have a unique Interrogate
Code or both directories can use the same code.
Default Interrogate Code: an empty text string.
Cycle Timer
When the end of a directory has been reached without receipt of an Acknowledge code, the
Cv2 waits for the time set in the Cycle timer before repeating the alarm transmission
sequence. This repetition will continue until the unit is acknowledged.