Filter
Top Products
Voice Storage and Configuration with the Telset 6-5
B1272M001
BARNETT ENGINEERING LTD. ProTalk Cv2
Directory Line
Cv2: “Directory A Line 1 is DIAL 2559545 VOICE”
You:
Edit current line
Delete current line
Edit a new line to be inserted before current line
Exit to Directory Menu
Accept current line and advance to next line. In Basic mode only,
if this line is empty and the directory is A or B, advance to Cycle
Timer,
Line Editing
Cv2: “beep”
You:
new line is [DIAL] 1234597 [VOICE]
new line is [DIAL] 1234567 [VOICE]
Cycle Timer (Basic Mode Only)
Cv2: “Directory A Timer is 5 minutes”
You:
Change timer to 20 minutes (range: 1-255 min)
Exit to Directory Menu
Accept timer and advance to Acknowledge Code
Acknowledge Code
Cv2: “Acknowledge Code is 123”
You:
Change acknowledge code to 55 (max 8 digits)
Exit to Directory Menu
Accept acknowledge code and advance to Interrogate Code
Interrogate Code
Cv2: “Interrogate Code is 456”
You:
Change interrogate code to 99 (max 8 digits)
Exit to Directory Menu
Accept interrogate code and exit to Directory Menu
General Configuration Menu (Basic and Advanced mode)
Answer Rings
Cv2: “Answer Rings is 4"
You:
Change number of rings to 2 (range: 1-9)
Exit to Main Menu
Accept answer rings and advance to Call Progress Control
Call Progress Control (busy signal and answer detect)
Cv2: “Dial Control is Off”
You:
Turn call progress detector off