Filter
Top Products
Voice Editor 7-3
B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2
Message File Section
Load
A File Open dialog box is used to select the required message file with the .msg
extension. Message files contain the phrases used by the Cv2 to identify Site ID,
Groups and Points. If there are individual phrases with a file location present you
will have the option of writing over them or leaving them in place when the new
message file is loaded.
Save
A File Save dialog box is used to select the location and name of a message file.
The saved file is built from the information in the individual phrase list boxes.
Where a file name for an external phrase file is found, that file is opened and the
data merged into the output message file. Where the phrase is contained in the
currently loaded message file, the phrase data is extracted and merged into the
output message file. If the save process is unable to open any of the source files
an error will be reported and the process ended.
Read from ProTalk
Before this button is pressed, a Cv2 must be connected to the PC with the
communications cable. After the message file has been read from the unit a File
Save dialog box opens to allow the location and name to be entered. This file
now becomes the loaded message file as though it was selected by the Load
operation.
Write to ProTalk
A message file that is currently stored on disk can be transferred to the Cv2. The
file must be on disk; the information in the current voice editing session is not
used directly. If you want to transfer the current session it must be saved to disk
first.
Com Port
The setting of this combo box determines which serial port is used for the
communications with the Cv2.
Configuration File Section
Load
A File Open dialog box is used to select a previously saved configuration file with
the .vcf extension.
Save
A File Save dialog box is used to select the location and name of the stored
configuration file. A configuration file does not contain any phrase data, only
pointers to the source location for the phrases. The file is saved with a .vcf
extension.