Filter
Top Products
Configuration using the PC 4-2
B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2
4.5 Program Functions - Advanced mode
The menu and taskbar for the advanced mode is shown below:
File Operations
File Open
If you do not want to edit the default database, use the File Open button to select a different
configuration file. This will bring up the standard Windows File Open dialog box where you
can open another .dat file.
File Save As
To save the current configuration under a different name, use the Save As button to bring up
the standard Windows Save As dialog box. Enter a new name and save the file. After the file
has been saved under a different name, subsequent save operations will store the configuration
data with the new name.
File Save
Use the Save button to save the current configuration database. If the name has not been
changed during this session using Save As, the data will be stored as the default Cv2.dat file.
If the name has been changed then the file will be saved under the new name.
In addition to the buttons on the taskbar, the File menu also contains the function Clear
Database which creates an empty Cv2 configuration.
Summary
Bring up a printable summary of all settings and warnings.
Change Mode
Change the mode to Basic.
Hardware
Inputs - Setup the type of input for each port and select basic hardware settings.
Outputs - Setup the type of output for each port and select basic hardware settings.
General
Settings that concern the operation of the entire Cv2 are entered in the General section.