Filter
Top Products
Cellphone Status Codes 9-1
B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2
9 Cellphone Status Codes
Following is summary of the transceiver codes that can returned to the telset from the cellphone
configuration section.
9.1 Received Signal Strength Indicator - RSSI (code 1)
Speaks “Code One is 8, 8, 8, 8, ....” where 0 = very poor, 15 = very good
9.2 Service (code 2)
Speaks “Code Two is AB”, where
A = Current Service
OFF = No Service
0: Analog Service
1: CDMA Cellular Service
2: CDMA PCS Service
3: Sleep Mode
B = roaming indicator
0 = normal
1-8 = roaming
9.3 SID (code 3)
Speaks the 5 digit System Identification
9.4 NID (code 4)
Speaks the 3 digit Network Identification
9.5 State (code 5)
Speaks “Code Five is AB” where AB is the two character transceiver state
00: No Service (either mode)
Analog States:
01: Initialization
02: Idle
03: Voice Channel Initialization
04: Waiting For Order
05: Waiting For Answer
06: Conversation
07: Release
08: System Access
CDMA States:
81: Initialization
82: Idle
83: Voice Channel Initialization
84: Waiting For Order
85: Waiting For Answer
86: Conversation
87: Release
88: Update Overhead Information
89: Mobile Station Origination Attempt
8A: Page Response
8B: Order/Message Response
8C: Registration Access
8D: Message Transmission