Filter
Top Products
Section 6
Specifications and Product Data
Specifications and Product Data 6-1MN894
Identification
Three Phase Starters
Control Type
M- Multipurpose
M B
Control Group
A - Self powered logic control module
B - Logic control modules that require
115 or 230VAC.
Input Voltage Code
7- 208/230/460VAC (60Hz)
8- 230/460/575VAC (60Hz)
MA9- 220/380/415 (50Hz)
MB9- 380/400/415VAC (50Hz)
7 − 030 −
Ampere Rating
008- 8 Amp
016- 16 Amp
030- 30 Amp
055- 55 Amp
080- 80 Amp
160- 160 Amp
250- 250 Amp
420- 420 Amp
600- 600 Amp
840- 840 Amp
C B
Bypass Contactor
0 − Normally not shown unless a
reduced size bypass is used.
A − First size smaller bypass.
B − Second size smaller bypass.
C − Third size smaller bypass.
Enclosure
A- Open
B- NEMA1 (IP32)
C- NEMA12 (IP65)
P- Panel Mount
Configuration
A - Combination with overload & circuit
breaker).
B - Non-combination (with overload).
C - Starter only.
D - Combination with fuse disconnect.
G - Bypass, combination starter.
H - Bypass, non-combination starter.
J - Bypass, starter only.
K - Bypass combination starter with
fuse disconnect.
− **
Disconnect Size
0 − Normally not shown unless a
reduced size disconnect is used.
1 − Reduced size disconnect used:
i.e. 800 amp breaker on a 840amp
control instead of a 1000 amp
breaker.