Auto Page C3-RS1100 Automobile Alarm User Manual


 
C3 RS1100REV. A
22
2
H6/6 Brown /
White Wire = (-)
200mA Horn
Output
H6/6 Brown /
White Wire =
Factory Security
Rearm Signal
Output
3
Fahrenheit
display for
Temperature
Celsius display
For temperature
4
Override
Without
Password Pin
Code
Override With
Password Pin
Code
5 +
H6/7 Black /
Green Wire
Channel 4
Output =
Pulsed output
H6/7 Black /
Green Wire
Channel 4
Output =
Latched output
H6/7 Black /
Green Wire
Channel 4
Output =
Latched output
and reset with
ignition “on”
H6/7
Black / Green
Wire Channel 4
Output = Timer
programming (set
to any interval
between 1 second
and 2 m inutes.)
6 +
H6/22 Black /
Red Wire
Channel 5
Output =
Momentary
output
H6/22 Black /
Red Wire
Channel 5
Output =
Latched output
H6/22 Black /
Red Wire
Channel 5
Output =
Latched output
and reset with
ignition “on”
H6/22 Black / Red
Wire Channel 5
Output = Timer
programming (set
to any interval
between 1 second
and 2 minutes.)
7 +
H6/11 Black /
Violet Wire
Channel 6
Output =
Momentary
output
H6/11 Black /
Violet Wire
Channel 6
Output =
Latched output
H6/11 Black /
Violet Wire
Channel 6
Output =
Latched output
and reset with
ignition “on”
H6/11 Black /
Violet Wire
Channel 6
Output = Timer
programming (set
to any interval
between 1 second
and 2 minutes.)
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking
light flashes will confirm exit.
Channels 4 /5 /6 Timer Control Output Programming.
Enter:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch 7 times (holding in on the 7th push) until three chirps with
one long chirp is heard then release the valet switch. You are now in the Alarm
feature ‘C’ programming mode.
Timer Program:
1. Press and release and buttons together 4 times, [4] LED flash, [4]
siren/horn chirps to indicate that you are in features “Channel 4 Timer Programming
mode”.
2. Press and hold the valet switch, the timer will immediately start.
3. When the desired interval has passed, release the valet switch. 1 long chirp for
confirmation. (Set to any interval between 1 second and 2 minutes)