Filter
Top Products
C3 RS1100REV. A
20
1 Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch 5 times (holding in on the 5
th
push) until two chirps with one
long chirp is heard then release the valet switch. You are now in the Alarm feature
“B” programming mode.
3 Press and release the transmitter button corresponding to the feature you want to
program.
Press
Transmitter
Button
One Chirp / LED
one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps /
LED four pulses
1
Pathway
Illumination
Feature “off”
Parking light
turns “on” for 30-
second upon an
unlock signal
Parking light turns
“on” for 30-
second upon an
unlock signal &
10-second upon a
lock signal.
2
Ignition controlled
door locks &
unlocks
Ignition
controlled door
locks only
Ignition
controlled door
unlocks only
Without ignition
controlled door
locks & unlocks
3
0.8 second door
lock & unlock
3.5 second door
lock & Unlock
0.8 second Lock,
0.35 second
Unlock
0.8 sec. dbl
Lock,
0.8 sec. dbl
Unlock
Five Chirps = 0.8 second Lock, double 0.8 second. Unlock
Six Chirps = Double 0.8 second Lock, 0.8 second Unlock
Seven Chirps = Door lock with “Comfort Feature”
Eight Chirps = DBI Two step unlock ( DBI ONLY )**
Nine chirps = DBI Unlock ALL doors ( DBI Only )**
**Select either of these options when using Autopage Two Way Data Bus
Interface Only. For use with ADS CI3 Compatible data modules and/or CI3
Telematics Module.
4
H5/4 Brown Wire
= (+) Constant
Siren output
H5/4 Brown Wire
=5-second (+)
pulse Siren
output
H5/4 Brown Wire =
(+) Pulsing Output
(Relay required
for [-] Horn)
5 +
3 Hours Timer Start
2 Hours Timer
Start
6 +
The Vehicle without
Turbo
The Vehicle with Turbo (The system Can be Arm with the
engine running)