Filter
Top Products
3-31
REAR SHOCK ABSORBER REBOUND DAMPING
FORCE ADJUSTMENT
INSP
ADJ
EC36N014
REAR SHOCK ABSORBER REBOUND
DAMPING FORCE ADJUSTMENT
1. Adjust:
9Rebound damping force
By turning the adjuster 1.
9STANDARD POSITION:
This is the position which is back by the specif-
ic number of clicks from the fully turned-in posi-
tion. (Which align the punch mark a on the ad-
juster with the punch mark b on the bracket.)
*For EUROPE
cC
Do not force the adjuster past the mini-
mum or maximum extent of adjustment.
The adjuster may be damaged.
Stiffer
aa
→ Increase the rebound damping
force. (Turn the adjuster
11
in.)
Softer
bb
→ Decrease the rebound
damping force. (Turn the
adjuster
11
out.)
Minimum
20 clicks out
(from maximum
position)
Extent of adjustment:
Maximum
Fully turned in
position
Standard position:
About 12 clicks out
*About 10 clicks out
5MV-9-10-3B 6/12/00 8:22 PM Page 12