Filter
Top Products
5-31
CHAS
FRONT FORK
EC554200
Base valve
1. Inspect:
9Valve assembly 1
Wear/Damage→Replace.
9O-ring 2
Damage→Replace.
EC554400
Fork spring
1. Measure:
9Fork spring free length a
Out of specification→Replace.
EC554502
Inner tube
1. Inspect:
9Inner tube surface a
Score marks→Repair or replace.
Use #1,000 grit wet sandpaper.
Damaged oil lock piece→Replace.
9Inner tube bends
Out of specification→Replace.
Use the dial gauge 1.
NOTE:
The bending value is shown by one half of the
dial gauge reading.
w
Do not attempt to straighten a bent inner
tube as this may dangerously weaken the
tube.
EC554600
Outer tube
1. Inspect:
9Outer tube 1
Score marks/Wear/Damage→Replace.
Standard <Limit>
460 mm 455 mm
(18.1 in) (17.9 in)
Fork spring free length:
Inner tube bending limit:
0.2 mm (0.008 in)
5MV-9-10-5B 6/13/00 3:16 PM Page 5-31