Filter
Top Products
4-64
ENG
CRANKCASE AND CRANKSHAFT
EC4N3301
Crankshaft
1. Remove:
9Crankshaft 1
Use the crankcase separating tool 2 and
crankcase separating bolt 3.
cC
Do not use a hammer to drive out the
crankshaft.
EC4N3401
Crankshaft bearing
1. Remove:
9Bearing 1
NOTE:
9Remove the bearing from the crankcase by
pressing its inner race as shown in å.
9If the bearing is removed together with the
crankshaft, remove the bearing using a general
bearing puller 2 as shown in ∫.
9Do not use the removed bearing.
EC4N4000
INSPECTION
EC4N4101
Crankcase
1. Inspect:
9Contacting surface a
Scratches → Replace.
9Engine mounting boss b, crankcase
Cracks/Damage → Replace.
Crankcase separating tool:
YU-1135-A/90890-01135
Crankcase separating bolt:
YM-1305/90890-01305
5MV-9-10-4D 6/13/00 3:19 PM Page 3