Filter
Top Products
4-32
ENG
CLUTCH AND PRIMARY DRIVEN GEAR
EC493000
REMOVAL POINTS
EC483211
Clutch boss
1. Remove:
9Nut 1
9Lock washer 2
9Clutch boss 3
NOTE:
Straighten the lock washer tab and use the
clutch holding tool 4, 5 to hold the clutch boss.
å
For USA and CDN
∫
Except for USA and CDN
EC494000
INSPECTION
EC484100
Clutch housing and boss
1. Inspect:
9Clutch housing 1
Cracks/Wear/Damage → Replace.
9Clutch boss 2
Scoring/Wear/Damage → Replace.
EC484201
Primary driven gear
1. Check:
9Circumferential play
Free play exists → Replace.
9Gear teeth a
Wear/ Damage → Replace.
EC484400
Clutch spring
1. Measure:
9Clutch spring free length a
Out of specification → Replace springs as
a set.
Clutch holding tool:
YM-91042................................
44
90890-04086............................
55
Clutch spring free length:
Standard <Limit>
40.1 mm 38.1 mm
(1.579 in) (1.500 in)
å
∫
å
5MV-9-10-4B 6/12/00 8:39 PM Page 13