Filter
Top Products
3-29
REAR SHOCK ABSORBER INSPECTION
INSP
ADJ
9STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
cC
Do not force the adjuster past the minimum
or maximum extent of adjustment. The ad-
juster may be damaged.
w
Always adjust each front fork to the same
setting. Uneven adjustment can cause
poor handling and loss of stability.
3. Install:
9Rubber cap
EC36K000
REAR SHOCK ABSORBER INSPECTION
1. Inspect:
9Swingarm smooth action
Abnormal noise/Unsmooth action →
Grease the pivoting points or repair the
pivoting points.
Damage/Oil leakage → Replace.
Standard position:
14 clicks out
*12 clicks out
*For EUROPE
5MV-9-10-3B 6/12/00 8:22 PM Page 10