Filter
Top Products
4-70
ENG
TRANSMISSION, SHIFT CAM AND SHIFT FORK
EC4H3000
REMOVAL POINTS
EC4H3200
Transmission
1. Remove:
9Main axle 1
9Drive axle 2
NOTE:
9Tap lightly on the transmission drive axle with a
soft hammer to remove.
9Remove assembly carefully. Note the position
of each part. Pay particular attention to the lo-
cation and direction of shift forks.
EC4H4000
INSPECTION
EC4H4200
Gears
1. Inspect:
9Matching dog a
9Gear teeth b
9Shift fork groove c
Wear/Damage → Replace.
2. Check:
9Gears movement
Unsmooth movement →
Repair or replace.
EC4H4600
Bearing
1. Inspect:
9Bearing 1
Rotate inner race with a finger.
Rough spot/Seizure → Replace.
5MV-9-10-4D 6/13/00 3:20 PM Page 9