Filter
Top Products
2-15
SPEC
CABLE ROUTING DIAGRAM
A Install the brake hose so that its pipe portion
directs as show and lightly touches the
projection on the master cylinder.
B Pass the “ENGINE STOP” button lead in
the middle of the clutch holder.
C Pass the clutch cable in front of the throttle
cable.
D Clamp the “ENGINE STOP” button lead to
the handlebar to 3 clicks.
E Pass the brake hose in front of the number
plate and through the cable guide.
F Cross the clutch cable and throttle cable
over the number plate boss.
1 Brake hose
2 Master cylinder
3 “ENGINE STOP” button lead
4 “ENGINE STOP” button
5 Throttle cable
6 Clutch cable
7 Clamp
8 Cable guide
5MV-9-10-2 6/12/00 7:25 PM Page 2-15