6-5
ELEC
IGNITION SYSTEM
EC627011
CDI MAGNETO INSPECTION
1. Inspect:
9Pick-up coil resistance
Out of specification → Replace.
2. Inspect:
9Source coil 1 resistance
Out of specification → Replace.
3. Inspect:
9Source coil 2 resistance
Out of specification → Replace.
EC628000
CDI UNIT INSPECTION
Check all electrical components. If no fault is
found, replace the CDI unit. Then check the
electrical components again.
Tester (+) lead→White/Red lead 1
Tester (–) lead
→White/Blue lead 2
Pick–up coil Tester selector
resistance position
248~372Ω at
Ω × 100
20°C (68°F)
Tester (+) lead→Black/Red lead 1
Tester (–) lead
→Green/White lead 2
Source coil 1 Tester selector
resistance position
720~1,080Ω at
Ω × 100
20°C (68°F)
Tester (+) lead→Green/Blue lead 1
Tester (–) lead
→Black lead 2
Source coil 2 Tester selector
resistance position
44~66Ω at
Ω × 10
20°C (68°F)
5MV-9-10-6 6/12/00 9:05 PM Page 6-5