Filter
Top Products
4-33
ENG
CLUTCH AND PRIMARY DRIVEN GEAR
EC484500
Friction plate
1. Measure:
9Friction plate thickness
Out of specification → Replace friction
plate as a set.
Measure at all four points.
EC484600
Clutch plate
1. Measure:
9Clutch plate warpage
Out of specification → Replace clutch plate
as a set.
Use a surface plate 1 and thickness
gauge 2.
EC494100
Push lever and push rod
1. Inspect:
9Push lever 1
9Push rod 2
Wear/Damage → Replace.
EC494200
Clutch cover
1. Inspect:
9Push rod bearing portion a
Wear/Damage → Replace.
Friction plate thickness:
Standard <Limit>
2.9~3.1 mm 2.8 mm
(0.114~0.122 in) (0.110 in)
Warp limit:
0.2 mm (0.008 in)
5MV-9-10-4B 6/12/00 8:39 PM Page 14