Filter
Top Products
5-52
CHAS
SWINGARM
Extent of removal Order Part name Q’ty Remarks
SWINGARM REMOVAL
Preparation for
Hold the machine by placing the
removal
suitable stand under the engine.
Brake hose holder Refer to “FRONT BRAKE AND
Rear caliper REAR BRAKE”section.
Bolt (brake pedal) Shift the brake pedal backward.
Drive chain
1 Chain support 1
2 Chain tensioner (lower) 1
3
Bolt (rear shock absorber-relay arm)
1 Hold the swingarm.
4 Bolt (connecting rod) 1
5 Pivot shaft 1
6 Swingarm 1
Extent of removal: 1 Swingarm removal
1
w
Support the machine securely so there is no dan-
ger of it falling over.
53 Nm (5.3 m•kg, 38 ft•lb)
80 Nm (8.0 m•kg, 58 ft•lb)
19 Nm (1.9 m•kg, 13 ft•lb)
7 Nm (0.7 m•kg, 51 ft•lb)
85 Nm (8.5 m•kg, 61 ft•lb)
EC570000
5MV-9-10-5C 6/12/00 8:51 PM Page 5-52