Filter
Top Products
5-37
CHAS
FRONT FORK
23. Install:
9Cushion rubber 1
9Washer 2
9Spacer 3
To cap bolt 4.
NOTE:
Install the cushion rubber with its smaller dia.end
a facing the cap bolt.
21. Measure:
9Distance a
Out of specification→Turn into the locknut.
24. Install:
9Push rod 1
9Fork spring 2
NOTE:
9Install the fork spring with the damper rod 3
pulled up.
9Install the fork spring with its smaller pitch end
facing the cap bolt. (For EUROPE)
9After installing the fork spring , hold the damper
rod end so that it will not go down.
25. Install:
9Cap bolt 1
Fully tighten the cap bolt onto the damper
rod by hand.
22. Loosen:
9Rebound damping adjuster 1
NOTE:
9Loosen the rebound damping adjuster finger
tight.
9Record the set position of the adjuster (the
amount of turning out the fully turned in posi-
tion).
Distance
aa
:
20 mm (0.79 in) or more
Between damper rod
11
top and
locknut
22
top.
5MV-9-10-5B 6/13/00 3:17 PM Page 5-37