3-15
IDLE SPEED ADJUSTMENT/MUFFLER INSPECTION/
SILENCER FIBER REPLACEMENT
INSP
ADJ
EC35M010
IDLE SPEED ADJUSTMENT
1. Start the engine and thoroughly warm it up.
2. Adjust:
9
Idle speed
EC35P010
MUFFLER INSPECTION
1. Inspect:
9O-ring 1
Damage → Replace.
EC35R041
SILENCER FIBER REPLACEMENT
1. Remove:
9Seat
9Side cover (right)
9Bolt (silencer) 1
9Silencer 2
9Bolt (fiber) 3
Adjustment steps:
9Loosen the locknut 1.
9Turn the throttle stop screw 2 until the en-
gine runs at the lowest possible speed.
9Tighten the locknut.
To increase idle speed → Turn the throttle
stop screw
22
in.
To decrease idle speed → Turn the throttle
stop screw
22
out.
5MV-9-10-3A 6/12/00 8:26 PM Page 16