Filter
Top Products
5-32
CHAS
FRONT FORK
EC554700
Cap bolt
1. Inspect:
9Cap bolt 1
9O-ring 2
9Air bleed screw 3
Wear/Damage→Replace.
EC555000
ASSEMBLY AND INSTALLATION
EC5551A1
Front fork assembly
1. Wash the all parts in a clean solvent.
2. Install:
9Damper rod 1
To inner tube 2.
cC
To install the damper rod into the inner
tube, hold the inner tube aslant. If the inner
tube is held vertically, the damper rod may
fall into it, damaging the valve inside.
3. Install:
9Copper washer 1
9O-ring 2
9Base valve 3
To inner tube 4.
4. Tighten:
9Base valve 1
NOTE:
9Use a damper rod holder 2 to lock the damper
rod 3.
9Apply the LOCTITE
®
on the base valve thread.
Damper rod holder:
YM-1423/90890-01423
55 Nm (5.5 m•kg, 40 ft•lb)
5MV-9-10-5B 6/13/00 3:16 PM Page 5-32