Yamaha YZ125N1 Motorcycle User Manual


 
4-35
ENG
CLUTCH AND PRIMARY DRIVEN GEAR
5. Install:
9Friction plate 1 1
9Clutch plate 2
9Friction plate 2 3
NOTE:
9Install the clutch plates and friction plates alter-
nately on the clutch boss, starting with a friction
plate and ending with a friction plate.
9Use the friction plates 1 for the first and final
while paying attention to the difference in sur-
face pattern.
9Apply the transmission oil on the friction plates
and clutch plates.
10 Nm (1.0 m•kg, 7.2 ft•lb)
8. Install:
9Clutch spring 1
9Screw (clutch spring) 2
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
6. Install:
9Push rod 1
9Plain washer 2
9Bearing 3
To pressure plate 4.
NOTE:
Apply the lithium soap base grease on the bear-
ing, plain washer and push rod.
7. Install:
9Pressure plate 1
5MV-9-10-4B 6/12/00 8:40 PM Page 16