Filter
Top Products
04 Interior
87
Cargo area
04
Bottle holder (option)
There is a bottle holder for larger bottles lo-
cated to the rear of the tunnel console.
Soft cargo cover (option)
Soft cargo cover
The cargo cover is pulled over the luggage
and secured in the rear load retaining eyelets.
Undo (D) and, if necessary, (C) during load-
ing.
Fitting the cargo cover
– Hook in the hooks in the front load retain-
ing eyelets by the floor (A).
– Fit the front brackets in (B) by pressing
together the spring-loaded rail and fit it
into place on both sides.
– Fit the rear brackets in (C) in the same
way.
– Hook in the hooks in the rear load retain-
ing eyelets (D).
Hanging up the cargo cover when not in
use
– Unhook the hooks from the rear load
retaining eyelets (D).
– Press the rail together and remove it from
the rear bracket (C). Place the rail at the
front of the cargo area floor.
– Hook in the hooks in the rail next to the
mounting points (B).
The cargo cover now hangs next to the rear
seat backrest ready for the next time it is to
be used.
Removing the cargo cover
– Unhook the hooks and remove one rail at
a time by pressing them together and
removing them from their mounting
points.
– When all mounting points are detached
the cargo cover can be rolled up and
placed at the rear of the cargo area floor to
make space for bulky loads.
NOTE
The cargo cover has no load-securing func-
tion Never load anything on top of the cargo
cover. For securing loads, see page 140.