Filter
Top Products
02 Instruments and controls
61
Rearview and door mirrors
02
Door mirrors
The controls for adjusting the two door mir-
rors are at the front of the driver’s door arm-
rest. The rearview mirrors can be operated in
ignition position I and II.
–Press the L button for the left-hand door
mirror or the R button for the right-hand
door mirror. The light on the button illumi-
nates.
– Adjust the position with the joystick in the
centre.
–Press the L or R button again. The lamp
goes out.
Retractable power door mirrors
(option)
The mirrors can be retracted for parking and
driving in narrow spaces. This can be done in
ignition position I and II.
Retracting the mirrors
–Press down the L and R buttons at the
same time.
– Release the buttons. The mirrors automat-
ically stop in the fully retracted position.
Folding out the mirrors
–Press down the L and R buttons at the
same time.
– Release the buttons. The mirrors automat-
ically stop in the fully extended position.
Resetting to neutral
Mirrors that have been moved out of position
by an external force must be reset to the neu-
tral position for the electrical retracting and
extending to work.
–Use the L and R buttons to retract the
mirrors.
– Extend them again with the L and R but-
tons. The mirrors are now reset in neutral
position.
Approach and home safe lighting
The lamp on the door mirrors (option) illumi-
nates when the approach lighting or home
safe lighting is activated.
Blind Spot Information System, BLIS
(option)
BLIS is an information system that under cer-
tain conditions can help to draw the driver’s
attention to vehicles moving in the same di-
rection in the so-called "blind spot", see
page 125.
IMPORTANT
Do not use a scraper to remove ice from the
mirrors as this can scratch the glass. Use
the defroster function instead, see page 71.
WARNING
The driver-side door mirror is wide angled
to provide optimal vision. Objects may ap-
pear further away than they actually are.