Filter
Top Products
06 Starting and driving
118
Automatic gearbox
06
Manual positions
To move from the automatic driving
position D to a manual position, move the
gear selector to position M. To go from
position M to the automatic driving
position D, move the selector to position D.
While driving
The manual gearshift mode can be selected
at any time while driving. The engaged gear
is locked until you choose another gear.
If the gear selector is moved to – (minus) the
car changes down a gear and engine brakes
at the same time as the accelerator pedal is
released. If the gear selector is moved to
+ (plus) the car changes up a gear.
The selected gear is indicated on the com-
bined instrument panel, see page 39.
• Geartronic does not permit downshifting/
kick-down which would result in an engine
speed high enough to damage the engine.
Nothing happens if the driver tries to shift
down in this way. The original gear re
-
mains engaged.
• Geartronic automatically shifts down if the
driver allows the speed to decrease lower
than a level suitable for the selected gear,
in order to avoid jerking and stalling.
W – Winter
The W button is used to ac-
tivate and deactivate the
winter program W. Display
of the W symbol in the
combined instrument panel
indicates that the winter
program is active.
The winter program starts the gearbox in a
higher gear to facilitate starting off on slip-
pery surfaces. The lower gears are only acti-
vated with kick-down when the winter pro-
gram is engaged.
The W program can be selected regardless
of the position of the gear selector, but is
only operational when the selector is in
position D.
To prevent overrevving, the gearbox control
program has a protective downshift inhibitor.
NOTE
Geartronic contains two safety functions: