Filter
Top Products
09 Maintenance and service
186
Replacing bulbs
09
Cargo area
Insert a screwdriver and gently turn so that
the lamp housing comes loose.
Interior lighting in cargo area
Cargo area lighting also includes a further
lamp on the left-hand side of the cargo area.
– Insert a screwdriver and gently turn so that
the lens detaches.
– Unplug the connector from the bulb hold-
er.
Vanity mirror lighting
Removing the mirror glass:
– Insert a screwdriver underneath the lower
edge, in the centre. Carefully prise up the
lug on the edge.
– Insert the screwdriver underneath the
edge on the left and right-hand sides (by
the black rubber sections), and prise care-
fully so that the glass comes loose in the
lower edge.
– Carefully detach and lift aside the entire
mirror glass and cover.
Fitting the mirror glass:
– First, press the three lugs at top edge of
mirror glass back into position, then press
in the three lower ones.