Filter
Top Products
10 Infotainment system
199
Radio functions
10
Radio controls
1. FM/AM – Wavelength selection
2. Station presets
3. TUNING – Knob for station searches
4. SCAN – Scanning
5. Navigation button – Tuning and menus
6. EXIT – Cancel current function
7. AUTO – Automatic storage of stations
Tuning
Automatic tuning
– Select wavelength using AM/FM (1).
– Give a brief press, left or right, on the
navigation button (5).
Manual tuning
– Select wavelength using AM/FM (1).
– Adjust the frequency by turning
TUNING (3).
Tune into a station with a long press (left or
right) on the navigation button or by using the
steering wheel keypad:
– Hold the right or left side of the navigation
button depressed until the desired fre-
quency appears on the display.
As long as the frequency graphic appears on
the display, searching can be resumed by
briefly pressing the navigation button (left or
right) (5)
Storing stations
Ten station presets can be stored per wave-
length. FM has two memories for presets:
FM1 and FM2. Preset stations are selected
using the preset buttons (2) or the steering
wheel keypad.
Storing stations manually
– Tune into a station.
– Hold a station preset button depressed
until the message
Station stored appears
on the display.
Automatic storage of stations
AUTO (7) seeks out the ten strongest radio
stations and stores them automatically in a
separate memory. The function is especially
useful in areas where the radio stations and
their frequencies are unfamiliar.
Starting automatic storage of stations
– Select wavelength using AM/FM (1).
–Hold AUTO (7) depressed until
Autostor-
ing...
appears on the display.
Once
Autostoring... disappears from the dis-
play, the stations are stored. The radio con-
tinues in Auto mode and
Auto appears on the
display. The automatically stored presets can
now be selected using the preset buttons (2).
Cancelling automatic storage of sta-
tions
– Press EXIT (6).
Selecting an autostored preset
Allowing the radio to remain in Auto mode
provides access to the autostored presets.
– Briefly press AUTO (7).
Auto appears on the display.
– Press a preset button (2).
The radio remains in Auto mode until it is ex-
ited by a brief press on AUTO (7), EXIT (6) or
AM/FM (1).