Filter
Top Products
04 Interior
80
Front seats
04
Seating position
The driver’s and passenger seats can be ad-
justed to the optimum sitting and driving po-
sitions.
1. Forward/backward: lift the handle to ad-
just the distance to the steering wheel
and pedals. Check that the seat is locked
after changing position.
2. Raise/lower front edge of seat cushion,
pump up/down.
3. Raise/lower the seat, pump up/down.
4. Lumbar support
1
, turn the wheel.
5. Adjust backrest rake, turn the wheel.
6. Control panel for power seat (option).
The lever (2) is not available for all seat mod-
els.
Entry to the rear seat – Easy entry
Make sure that the seatbelt is removed from
the belt guide before passengers enter or exit
the car, see page 14. The easy entry position
is intended for use when the seat is empty.
Mechanical seat
Move the seat forward:
– Move the handle (1) up to release the
backrest.
– Fold the backrest forward until it locks.
– Release the handle and slide the seat
forwards.
Move the seat backward:
– Move the seat backward to the original
position.
– Move the handle (1) up to fold the back-
rest back.
The seat returns to the same position it had
before folding forward for easy entry.
Power seat
Move the seat forward:
– Move the handle (1) up to release the
backrest.
– Fold the backrest forward until it locks.
– Press the button (2) located beside the
head restraint. Keep it depressed.
Easy entry
Move the seat backward:
– Press the button (2) located to the side of
the head restraint. Keep it depressed.
– Move the handle (1) up and fold back the
backrest.
1
Also applies to power seat.
WARNING
Adjust the position of the driver’s seat be-
fore setting off, never while driving.
Check that the seat is locked in position.