Filter
Top Products
07 Wheels and tyres
150
Warning triangle and spare wheel
07
Warning triangle
Follow the regulations for the use of a warn-
ing triangle
1
. Position the warning triangle in
a suitable place with regard to traffic.
1. Undo the case containing the warning
triangle, it is secured with Velcro straps.
Take the warning triangle from the case.
2. Lower the warning triangle’s support
legs.
Ensure the warning triangle and its case are
properly secured in the cargo area after use.
Spare wheel and jack
The car’s original jack
The original jack
2
must only be used for
changing wheels. The jack’s thread should
always be well greased. The spare wheel,
jack and wheel wrench are found under the
floor in the cargo area.
Taking out the spare wheel:
A bolt runs through to secure the spare
wheel.
– Fold up the cargo area floor.
– Unscrew the retaining bolt and lift out the
wheel.
Putting the spare wheel and jack into
the cargo area:
– Wheel wrench.
– Jack and handle, secured with a tension-
ing strap.
– The spare wheel is bolted down with the
rim side down using the through-bolt.
1
Certain markets.
2
Certain variants and markets.