Filter
Top Products
Unit 4: Printer Configuration
Lt408 Operator Manual
4-32 PN: 9001152A
Allows the option of reprinting a label with key or not.
Allows the backfeed distance to be set. If using thermal transfer for printing, set the feed
distance less than 30mm to avoid detection of the ribbon end by accident.
Allows the printer to use either a NORMAL or FAST web acceleration. Large, heavy,
label rolls should use the NORMAL option while smaller, lighter rolls can use the FAST
option.
Allows selection of output mode options. MODE1 outputs signal in the status of
existence/non-existence for the number of remaining labels to be printed. MODE2
outputs signal in the status of online/offline.
Allows the user to assign a method a command priority. Where programming
instructions conflict, the printer will allow this assignment to take priority. This priority
assignment affects the settings for print darkness, print speed, start point correction,
operation mode, print method, and sensor types.
Allows the password function to enabled (ON) or disabled (OFF).
This screen will appear if the ON option was selected in the previous screen. Use the
arrow keys to scroll and enter a four-digit password.
Determines whether or not the printer will be compatible with a previous printer model.
Enables the length of the label stock installed to be manually entered.
SERVICE MODE (TABLE 4-8)
MENU DESCRIPTION
FUNCTION KEY
NONE
REPRINT
FORWARD / BACKFEED
DISTANCE
DEFAULT XXX MM
WEB ACCELERATION
FAST NORMAL
EXT 9PIN SELECT
MODE1 MODE2
PRIORITY SETTING
COMMAND INTERNAL
SET PASSWORD
ON OFF
PASSWORD NO.
XXXX
COMPATIBLE MODE
ON OFF
MEDIA LENGTH
XXXX MM