Filter
Top Products
Unit 4: Printer Configuration
Lt408 Operator Manual
4-30 PN: 9001152A
CENTRONICS INTERFACE MODE (TABLE 4-7)
MENU DESCRIPTION
Displays the operational status of the printer. The ONLINE status is displayed on the top
line and the label quantity status on the bottom. The message will be changed to
OFFLINE whenever the printer is switched offline by pressing the LINE key. When a
print job is received, the quantity line will indicate the number of labels to be printed. As
the label job prints, the display indicates the number of labels remaining to be printed.
Displays the operational status of the printer. The OFFLINE status is displayed on the
top line and the label quantity status on the bottom. The message will be changed to
ONLINE whenever the printer is switched online by pressing the LINE key.
Is a transitional screen that allows the operator to choose a given direction within the
menu map.
Is the premier screen of the Interface Mode. The Interface Mode allows the parameters
to be set for the printer to communicate with a host and vise-versa.
Select the YES option if an interface board for bi-directional communication will be
configured.
Determines whether the print data code requires deletion. Hexadecimal graphic data will
not be deleted. Select YES to delete all carriage return (CR) and line feed (LF)
commands in the data stream - including graphics and 2D bar codes.
This feature is used primarily to maintain compatibility with earlier models of SATO
printers.
Allows 1-byte command such as CAN and DLE code to be deleted. Will only appear
when the communication protocol is STATUS4 (for overseas specifications).
Allows the selection of the receive buffer type. Select MULTI for multiple buffers and
1ITEM for a single item buffer.
ONLINE
QTY: 000000
OFFLINE
QTY: 000000
ONLINE MODE
INTERFACE MODE
INTERFACE BOARD
SETTING
YES NO
IGNORE CR/LF
YES NO
IGNORE CAN/DLE
YES NO
RECEIVE BUFFER
MULTI 1 ITEM