Filter
Top Products
Unit 4: Printer Configuration
Lt408 Operator Manual
4-31 PN: 9001152A
SERVICE MODE (TABLE 4-8)
MENU DESCRIPTION
The Maintenance Mode is divided into two sections; the Service Mode and the Factory
Mode.
The Service Mode allows the programming of various dimensional settings, sensor
thresholds, and language options.
The Factory Mode permits counter reset of various printer components. Use the
printer’s operator panel to select and reset those features.
Allows sensitivity adjustment of the eye-mark sensor.
Allows slice level adjustment of the eye-mark sensor.
Allows sensitivity adjustment of the gap sensor.
Allows slice level adjustment of the gap sensor.
Select the ENABLE option to set the printer to automatically notify when media supply is
nearly exhausted.
Select the ENABLE option to set the printer to automatically notify when ribbon supply is
nearly exhausted.
Allows the operator to select to use a function key or not. If enable is selected, the
following menu will appear.
MAINTENANCE MODE
SERVICE MODE
FACTORY MODE
SENSOR LEVEL
I-MARK X.XV
LEVEL OFFSET XX
SENSOR LEVEL
I-MARK X.XV
SLICE LEVEL XX
SENSOR LEVEL
GAP X.XV
LEVEL OFFSET XX
SENSOR LEVEL
GAP X.XV
SLICE LEVEL XX
LABEL RE-DETECT
ENABLE DISABLE
RIBBON NEAR END
ENABLE DISABLE
FUNCTION KEY
ENABLE DISABLE