Filter
Top Products
Unit 4: Printer Configuration
Lt408 Operator Manual
4-9 PN: 9001152A
CENTRONICS INTERFACE SETUP MODE
This chapter provides the programming sequences required for Centronics interface setup. Use the keys of the
printer’s operator panel to select and enter the required options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
Figure 4-7, Centronics Interface Setup Mode
ATTENTION: Do not perform the following programming sequence if this is not the
interface type to be used. Instead, refer to the appropriate interface programming flow
chart.
POWER
LINE
Displayed
if password
feature is
enabled
PASSWORD
0000
LINE
CANCEL
Advanced
Mode
CANCEL
ENTER
ENTER
User
Mode
Cancels
print job
CANCEL
ENTER
CANCEL
ENTER
CANCEL
No
ENTER
ONLINE MODE
ONLINE
QTY: 000000
OFFLINE
QTY: 000000
INTERFACE MODE
INTERFACE BOARD
SETTING
YES NO
IGNORE CR/LF
YES NO
IGNORE CAN/DLE
YES NO
CANCEL
ENTER
Yes
ENTER
Select
No if using
USB
CANCEL
ENTER
RECEIVE BUFFER
MULTI 1 ITEM