Filter
Top Products
32
FEATURES AND CONTROLS
All Wheel Drive System
The All Wheel Drive system is
controlled by the 4X4 switch.
4X4 Mode
When the switch is on 4X4, the
ATV is in 4X4, and the 4X4 indi-
cator icon in the instrument clus-
ter display will be visible.
When in 4X4, the demand drive
unit will automatically engage
any time the rear wheels lose
traction. When the rear wheels
regain traction, the demand drive
unit will automatically disengage.
There is no limit to the length of
time the vehicle may remain in
4X4. The vehicle automatically
engages 4X4 when operating in
reverse if the switch is set to the
4X4 position.
2X4 Mode
When the switch is on 2X4, the ATV is in two-wheel drive at all times.
2x4
4X4
Switch