Mitsubishi Electronics FR-F740EC/E1 Automobile Accessories User Manual


 
MITSUBISHI ELECTRIC
FR-F 740 EC/E1
35
ACCESSORIES
External Options
In addition to the FR-PU04 control panel
that enables interactive operation of the
frequency inverter the available external
options also include additional EMC noise
filters, reactors for improving efficiency
and brake units with brake resistors.
Control panel (8 languages)
FR-PU04
Interactive control panel with LCD display. Refer to p.18 for detailed descriptio
67735
Connecting cable for remote control
panel
FR-A5 CBL
Cable for a remote connection of the control panel FR-DU07 or
FR-PU04.
Available length:1; 2.5 and 5 m
1 m: 70727
2.5 m: 70728
5 m: 70729
Adapter
FR-ADP
Connection adapter for FR-DU07
Required for remote connection of the
FR-DU07 with FR-A5CBL
157515
Connection cable
SC-FR PC
Communications cable for RS232 or RS485 interface to connect an
external personal computer
Length 3 m;can be used for example with
the VFD setup software
88426
USB-RS232 converter Port converter adapter cable from RS-232 to USB USB specification 1.1,0.35 m long
155606
VFD setup software
FR-SW0-SETUP-W
Parameterization and setup software for the whole FR-F 700 series
as well as all other Mitsubishi inverter series.
English/German
159746
EMC noise filter
FFR -२२,
FN -२२
Noise filter for compliance with EMC directives. Refer to p.36 for detailed description
see p. 36
DC converter circuit choke coil
MT-HEL
DC reactor for compensation of voltage
fluctuations.
Refer to p.37 for detailed description
see p.37
Mains power chokes
FR-BAL-B
For increased efficiency,reduction of mains feedback and compensa
-
tion of voltage fluctuations.
Refer to p.37 for detailed description
see p . 37
Brake units
MT-BU 5,
BU-UFS
For an improvement of the brake capacity.For high inertia loads and
active loads.Used in combination with a resistor unit.
Refer to p.38 and p.39 for detailed de-
scription
see p.38 and
p. 39
External brake resistors
MT-BR 5,
RUFC
To improve the brake capacity of the inverter;
is used in combination with a brake unit
Refer to p.38 ans p.39 for detailed de-
scription
see p.38 ans
p. 39
A DC reactor is included as standard equipment withfrequency inverters FR-F 740-01800 through 12120. These reactors are essential for operation and must be installed.
NET_A
NET_B
FG
D199K3C
E
C
HE
L
ON
FTT-10A
50051
T0121B
CON2
3
1
FR-A7NL
LW
ON ORKS
®
Interface
RUN–
LRUN–
TX–
SERVICE–
RX–
WINK–
FR-A7NL
LW
ON ORKS
®
Interface
RUN–
LRUN–
TX–
SERVICE–
RX–
WINK–
NET_A
NET_B
FG
D199K3C
ECHELON
FTT-10A
50051
T0121B
CON2
3
1
Mounting examples for
internal options