Filter
Top Products
10
MITSUBISHI ELECTRIC
FR-F 740 EC/E1
SYSTEM DESCRIPTION
User-friendly Operation
EXT
PU
FWD
REV
STOP
RESET
WRITE
READ
MON
HELP
7
4
1
0
2
3
8
5
6
9
SET
SHIFT
ESC
F
R
-
P
U
-
0
4
PARAMETERUNIT
- - - STOP
EXT
50
00
Hz
- - - STOP
EXT
50
00
Hz
FR-PU04
Easy configuration with control
panel or software
The FR-DU07 control panel is included as
standard equipment with all the inverters
of this series. It makes operation of the in
-
verter simple and intuitive and displays
operating parameters and alarm messa
-
ges. The jog shuttle “digital dial” control
provides fast and efficient access to all key
drive parameters.
The optional FR-PU04 control panel featu
-
res a long-life LC-display with a backlight
and integrated numeric keypad for direct
entry of operating parameters. The user
interface can be displayed in eight diffe
-
rent languages. This panel is designed as a
remote unit that is connected to the inver
-
ter with a cable. It also supports definition
of user groups with which you can imple
-
ment editable parameter sets that can
then be selected as required for specific
applications.
In addition to control panel operation the
frequency inverter can also be connected
to a standard PC via an RS-485 port and
operated from the PC with the optional
VFD setup software package. Using this
software you can configure, operate and
monitor multiple frequency inverters, eit
-
her in a network or directly from a single
PC or notebook computer. (See page 21 for
more details on this software package.)
Hz
MON
PU
REV
REV
SET
EXT
PU
EXT
STOP
RESET
NET
FWD
FWD
MODE
P. RU N
FR-DU07
A
V
8.8.8.8.
8.8.8.8.
FR-DU07
User-friendly
In addition to allowing you to enter and
display configuration and control parame
-
ters the integrated control panel can also
be used to monitor and display current
operating data and alarm messages. The
information is output on a 4-digit LED dis
-
play.
You can monitor all the current status pa
-
rameters of both the inverter itself and the
connected motor. Problems and mal
-
functions are indicated by error codes.
One-touch operation
Simple and intuitive configuration and
operation save both time and money. The
control panel’s jog shuttle “digital dial”
control provides much faster access to all
key drive parameters than would be possi
-
ble with conventional buttons and keys.
You can also use the dial to continuously
adjust the speed of the connected motor.
Removable panel with parameter
copy function
The control panel is removable and can
also be connected installed remotely, for
example in the door of a switchgear cabi
-
net. It also features a useful copy function
with which you can copy the parameter
settings of one frequency inverter to
another.
Alarm log
The control panel stores an alarm log for
up to 8 alarm messages that can be dis
-
played and checked on the panel. The
alarm details in the log include frequency,
current, voltage and cumulative operating
time at the time of the alarm.
Switch between direct and external
control
The frequency inverter can be controlled
directly via the control panel (PU mode) or
via external signals (EXT mode).
Hz
MON
PU
REV
REV
SET
EXT
PU
EXT
STOP
RESET
NET
FWD
FWD
MODE
P. RU N
FR-DU07
A
V
MON
PU
REV
REV
EXT
U
NET
FWD
FW
P.R UN
Hz
MON
PU
REV
REV
SET
EXT
PU
EXT
STOP
RESET
NET
FWD
FWD
MODE
P. RU N
FR-DU07
A
V
8
7
6
5
4
3
2
1
Example: Ad-
justing a para
-
meter with the
jog shuttle