Mercedes-Benz 2009 E-Class Automobile User Manual


 
Starter switch positions
94
Starter switch positions
SmartKey
G
Observe Safety notes, see
page 62.
Starter switch
}
For removing SmartKey (gear selector
lever must be in park position P)
$
Power supply for some electrical
consumers, e.g. radio
%
Ignition (power supply for all electrical
consumers) and driving position
&
Starting position
When you switch on the ignition, all lamps
(except low-beam headlamp indicator lamp,
high-beam headlamp indicator lamp, and turn
signal indicator lamps unless activated) in the
instrument cluster come on. If a lamp in the
instrument cluster fails to come on when the
ignition is switched on, have it checked and
replaced if necessary. If a lamp in the
instrument cluster remains on after starting
the engine or comes on while driving, refer to
“Lamps in instrument cluster” (Y page 330).
If the SmartKey is left in starter switch
position 0 for an extended period of time, it
can no longer be turned in the starter switch.
In this case, the steering is locked. To unlock,
remove SmartKey from the starter switch and
reinsert.
The steering is locked when the SmartKey is
removed from the starter switch.
!
If the SmartKey cannot be turned in the
starter switch, the vehicle battery may not
be sufficiently charged.
R
Check the vehicle battery and charge it
if necessary.
R
Get a jump start.
To prevent accelerated vehicle battery
discharge or a completely discharged
vehicle battery, always remove the
SmartKey from the starter switch when the
engine is not in operation.
KEYLESS-GO
G
Observe Safety notes, see
page 62.
Vehicles equipped with the KEYLESS-GO
feature are supplied with a SmartKey with
integrated KEYLESS-GO function.
With the SmartKey present in the vehicle,
pressing the KEYLESS-GO start/stop button
R
without the brake pedal depressed
corresponds to the various starter switch
positions (Y page 94)
R
with the brake pedal firmly depressed will
start the engine (Y page 124)
The function of the SmartKey overrules the
KEYLESS-GO function.
The SmartKey must be located in the vehicle.
X
Make sure the automatic transmission is in
park position P.
X
Do not depress the brake pedal.
Controls in detail