Mercedes-Benz 2009 E-Class Automobile User Manual


 
Loading and storing
214
1
Handle
2
Cargo compartment cover
Rolling up the cargo compartment cover
X
Use handle 1 to pull cargo compartment
cover 2 down into the horizontal position.
X
Unhook cargo compartment cover 2 from
its anchorages on the left and right sides.
To do so, pull cargo compartment cover
2 slightly towards the rear and lower it.
X
Slowly guide cargo compartment cover
2 back until it stops.
Pulling out the cargo compartment cover
X
Pull out cargo compartment cover 2
towards the rear until it engages.
Removing the twin roller blind
X
Roll up cargo net and cargo compartment
cover 2.
X
Fold both rear seat cushions forward
(Y page 207).
X
Fold the passenger-side rear seat backrest
forward (Y page 207).
X
Fold the driver’s side rear seat backrest
forward (Y page 207).
X
Push twin roller blind to the driver’s side out
of its anchorage on the seat backrest and
remove it.
Storage space under the cargo
compartment floor (wagon, E 63 AMG
only)
The vehicle tool kit and jack are stored under
the rear cargo compartment floor. A loading
tray and a folding box are located under the
front cargo compartment floor.
Opening the cargo compartment floor
1
Front cargo compartment floor
2
Rear cargo compartment floor
3
Handle
X
Use handle 3 to open cargo compartment
floor 1 or 2.
Controls in detail