Filter
Top Products
Seats
103
The head restraints should be adjusted so
that the back of the head is supported at
approximately eye level. This can reduce a
child’s risk of injury in the event of an
accident.
G
Warning!
Make sure the seat belt is positioned
correctly on the body and is engaged in the
seat belt buckle.
Damaged covers should be replaced with
original covers only.
Do not leave children unattended in the
vehicle, even when they are secured in a
child restraint system.
Make sure luggage and other objects are
adequately secured. The load could
otherwise injure someone in the event of an
accident, during hard braking or steering
maneuvers.
Folding out the third-row seat
1
Release handle for seat backrest
2
Release handle for seat cushion
Before folding out the seat backrest, you
must:
R
fold the rear seat backrests into an upright
position and lock them into place
R
move the handle for the twin roller blind
into the upper position
i
The rear seat backrests can be adjusted
to a more reclined position to make the
third-row seat more comfortable
(Y page 209).
X
Pull release handle 1 and fold seat
backrest for the third-row seat upward.
3
Mountings for seat belts
X
Hook seat belts into mountings 3.
X
Pull release handle 2 and fold seat
cushion for the third-row seat into sitting
position.
X
Press seat cushion as far down as it will go.
The seat backrest will then also engage
properly.
X
Fold head restraints into upright position.
Removing and installing seat cushions
You must remove the seat cushion when you
want to raise the loading floor, e. g. in the
event of a flat tire.
Controls in detail
Z