Mercedes-Benz 2009 E-Class Automobile User Manual


 
Replacing bulbs
350
R
Always use a clean lint-free cloth when
handling bulbs.
R
Your hands should be dry and free of oil and
grease.
R
If the newly installed bulb does not come
on, contact an authorized Mercedes-Benz
Center.
i
Mercedes-Benz recommends using
Longlife (LL) bulbs.
Have the LEDs and bulbs for the following
lamps replaced at an authorized Mercedes-
Benz Center:
R
Additional turn signal lamps in the exterior
rear view mirrors
R
Bi-Xenon lamps
R
Front fog lamps
R
Front side marker lamps
R
Parking and standing lamps (vehicles with
Bi-Xenon headlamps only)
R
Rear lamps (except license plate lamps)
R
High-mounted brake lamp
!
Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
Replacing bulbs for front lamps
Before you start to replace a bulb for a front
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
M.
X
Open the hood (Y page 241).
1
Housing cover for low-beam halogen or Bi-
Xenon headlamp
G
Warning!
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in
Xenon lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
It is recommended to have such work done
by a qualified technician.
2
Bulb socket for high-beam headlamp/
high-beam flasher bulb
3
Bulb socket for parking and standing lamp
bulb
4
Bulb socket for low-beam headlamp bulb
(halogen headlamps only)
5
Bulb socket for front turn signal lamp bulb
Low-beam bulb (halogen headlamps
only)
X
Turn housing cover 1 counterclockwise
and remove it.
X
Turn bulb socket 4 with the bulb
counterclockwise and remove it.
Practical hints