Filter
Top Products
Loading and storing
206
1
Seat cushion
2
Seat backrest
X
Grab the back of seat cushion 1 and fold
forward.
X
Push the rear seat head restraints all the
way in.
X
If the rear center seat is to be occupied
while driving, it may be necessary to fold
the seat belt buckle up again.
X
Pull the handle in the trunk.
Seat backrest 2 is released and the head
restraints fold back.
X
Fold seat backrest 2 forward.
!
Make sure the head restraints fit all the
way into the seat cushion pockets. This will
prevent the seat backrests from being
damaged during loading.
Returning rear seat backrest to original
position
G
Warning!
Always lock seat backrest in its upright
position when rear seat bench is occupied,
or the extended cargo volume is not in use.
Check for secure locking by pushing and
pulling on the seat backrest.
In an accident, during hard braking or
sudden maneuvers, loose items will be
thrown around inside the vehicle, and
cause injury to vehicle occupants unless
the items are securely fastened in the
vehicle.
To help avoid personal injury during a
collision or sudden maneuver, exercise
care when transporting cargo.
1
Seat cushion
2
Seat backrest
X
Fold seat backrest 2 rearward until it
engages.
Controls in detail