Filter
Top Products
Vehicle status messages in the multifunction display
295
lower the trunk floor before closing the
trunk.
1
Fastening clip
2
Luggage box
X
Turn fastening clips 1 to the left upwards
from the fastening bolts.
X
Lift luggage box 2 in the area of the
fastening bolts and remove it from the
trunk.
X
Installing: Insert the luggage box into the
trunk so that the fastening clips are in line
with the fastening bolts.
X
Push the front edge of the luggage box in
direction of arrows under the cover of the
trunk sill.
X
Press the fastening clips onto the fastening
bolts until they lock into place.
Vehicle status messages in the
multifunction display
Notes
Warning and malfunction messages appear in
the multifunction display located in the
instrument cluster.
Certain warning and malfunction messages
are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in this
Operator’s Manual.
Selecting the Vehicle status message
memory menu in the control system
(Y page 148) displays both cleared and
uncleared messages.
High-priority messages appear in the
multifunction display in red color.
Certain messages of high priority cannot be
cleared from the multifunction display using
the reset button (Y page 138) or button
j, k, · or è on the
multifunction steering wheel.
Other messages of high priority and
messages of less immediate priority can be
cleared from the multifunction display using
the reset button or button j, k,
· or è on the multifunction steering
Practical hints
Z