Filter
Top Products
Vehicle status messages in the multifunction display
308
Display messages Possible cause/consequence Possible solution
Tire Pressure Check tires
The Run Flat Indicator indicates that the
pressure is too low in one or more tires.
X
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers.
Observe the traffic situation around you.
X
Check the tires and, if necessary, change the
wheel (Y page 355).
X
Check and adjust tire inflation pressure as
required (Y page 255).
X
Restart the Run Flat Indicator after adjusting
the tire inflation pressure values
(Y page 256).
Tire pressure is only displayed
after driving for a
few minutes.
Vehicles with Advanced TPMS (Canada
only): The tire inflation pressure is being
checked.
X
Drive the vehicle for a few minutes.
Tire Pressure
Monitor
Inoperative
The TPMS (USA only) or Advanced TPMS
(Canada only) is malfunctioning.
X
Have the TPMS or Advanced TPMS checked at
an authorized Mercedes-Benz Center.
Tire Pressure
Monitor
Inoperative
No Wheel Sensors
There are wheels without appropriate
wheel sensors mounted (e.g. winter tires).
X
Have the TPMS or Advanced TPMS checked at
an authorized Mercedes-Benz Center.
X
Have the appropriate wheel sensors installed
at an authorized Mercedes-Benz Center.
Practical hints