Filter
Top Products
Seats
99
1
Head restraint release switch
X
Switch on the ignition.
X
Press the symbol-side on switch 1 to
release the head restraints.
Placing rear seat head restraints upright
X
Pull the head restraint forward until it locks
into position.
Removing and installing rear seat head
restraints (vehicles with split rear seat
bench only)
1
Release catch
X
Removing: Fold the seat backrest forward
(Y page 205).
X
Fold back head restraint (Y page 98).
X
Press head restraint release catch 1 and
pull the head restraints out of the guides.
X
Fold the seat backrest back to its original
position.
X
Installing: Insert head restraint and push
it down until it engages.
X
Make sure you place the correct head
restraint on the middle seat. It is marked
with the letter “M” on the outside of the
metal bars.
X
Make sure the head restraints engage fully.
Wagon
Folding rear seat head restraints back
(rear outer seats only)
1
Release button
X
Press release button 1 and fold the head
restraints backward.
Controls in detail
Z