Filter
Top Products
79
Customize Navigation Page
While on the Navigation Page press
MENU|↓ to CUSTOMIZE|ENT. Use ↓ ↑
to select a data category and press
ENT. Use ↑ ↓ to scroll through the
data options for the selected category. Highlight a desired data option
and press
ENT to turn it on (check) or turn it off (uncheck). You can
check or uncheck other data options to change the data displayed in
other boxes. If you get an Overlay Limit Exceeded message, you must
turn off (uncheck) a data category before you will be able to add an-
other category. When you are satisfied with the changes, press
EXIT.
Customize Map Page
While on the Map Page press
MENU|↓ to CUSTOMIZE|ENT. Use ↓ or ↑ to
highlight a data category and press
ENT, which will reveal the data op-
tions for the selected category. Scroll to a desired data option and press
ENT, which will turn it on (check) or turn it off (uncheck). Check or un-
check other data options to change the data displayed in other boxes. If
you get an Overlay Limit Exceeded message, you must turn off (un-
check) a data option before you will be able to add another category.
When you are satisfied with the changes, press
EXIT.
External Passive Antenna
The iFINDER ExpeditionC can be used with an optional external an-
tenna. While we recommend the more powerful external active antenna,
the unit can also operate with an external passive antenna. To do this,
modify the settings so the unit will look for an external passive antenna
rather than an external active antenna.
From the Satellite Status page, press
MENU|↓ to EXT PASSIVE ANT. Press
ENT to turn on (check) or turn off (uncheck) the External Passive an-
tenna command.
Remote Passive Antenna command on the Satellite Status Menu.