Filter
Top Products
40
These figures (from left to right) show the menu sequence for naming
and saving a GPS Data File from an MMC to the iFINDER's memory.
4. Loading: There may be more than one GPS Data File (*.USR) on
the card. To select a file, press
ENT to activate the selection box, use ↓
or ↑ to highlight the file, then press
ENT to accept the selection. Next,
press ↓ to
LOAD|ENT. The unit will display a completion message when
the data transfer is finished. To return to the main page display, press
EXIT|EXIT.
These figures (left to right) show the menu sequence for loading a GPS
Data File from an MMC into the iFINDER's memory.
Switch to Advanced Mode
To leave Easy Mode and switch to Advanced Mode:
1. Press
MENU|↓ to ADVANCED MODE|ENT.
2. A prompt will appear requesting confirmation.
3. Press
←|ENT and the unit switches to Advanced Mode.
Switch Back to Easy Mode from Advanced Mode
To leave Advanced Mode and switch back to Easy Mode:
1. Press
MENU|MENU|↓ to EASY MODE|ENT.
2. A prompt will appear requesting confirmation.
3. Press ←|
ENT and the unit switches to Easy Mode.