Filter
Top Products
37
NOTE:
If you are already located at or near the beginning of your back
trail, the arrival alarm will go off as soon as you hit Enter. Just
press
EXIT to clear the alarm and proceed.
On the map, your original trail is visible as a solid line, along with a
roughly parallel dotted line indicating the back trail to follow. The map
contains a steer arrow in the lower right corner. This arrow shows you
where to steer to reach the next waypoint on the trail.
The Navigation Page will also show the trail line and a bearing arrow,
which points to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you get close to a way-
point, and the steer arrow (on the map) and bearing arrow (on the com-
pass rose) will swing around and point to the next waypoint on the
trail. Press
EXIT to clear the alarm.
Navigate trail, map views: Driver is southbound heading straight to-
ward trail point 6 (left). The steer arrow tells the driver to go straight.
Southbound driver (right) has reached point 6 and must turn east to
follow trail. The steer arrow swings around to the left (east), toward
the next trail waypoint (arrival alarm message turned off for clarity.)
Back trail
dotted line
Trail point
Steer arrow
Present
position
arrow
North Ï