Filter
Top Products
67
← → keys to bring up
EDIT NAME and press ENT. When you are satisfied
with the entry, press
EXIT repeatedly to save the waypoint and return
to the main page display.
Create a Waypoint by Projecting a Position
This feature sets a waypoint at a location a specific distance and bear-
ing from a reference position. The reference position can be a highway
exit, a map place or an item from your waypoints list.
1. Press
ENT|↓ to PROJECTED POSITION|ENT. CREATE will be highlighted, so
press
ENT.
2. Press ↓ to
CHOOSE REFERENCE|ENT. Use ↑ and ↓ to select one of the
three options from the Select Point menu: My Waypoints, Map Place or
Highway Exit.
3. For this example, choose
MAP PLACES|ENT. A list of POI categories
will appear.
4. Select a category and press
ENT. That will launch the Find By menu
with nearest already highlighted. Press
ENT. A list of locations will ap-
pear with the POI closest to your position at the top of the list.
5. Choose the location you want to set as the reference point and press
ENT|ENT. Its position will appear as the reference position on the map.
6. Press ↓ to
DISTANCE|ENT. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT.
7. Press ↓ to
BEARING|ENT. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the bearing is cor-
rect. Press
ENT.
8. Press ↑ to
PROJECT|ENT. The waypoint information window appears. .
GO TO will already be highlighted, so press ENT if you want to begin
navigating to the new waypoint. If you do not want to navigate to the
waypoint, use the ← → keys to select one of the following options: Find
on Map, Edit Name, Edit Symbol, Edit Position, Edit Altitude or De-
lete. Press
ENT to select any of the options.
Select a Waypoint
To select a waypoint on the map use the arrow keys to center the cursor
over the waypoint. A red border will appear around the waypoint.
Delete a Waypoint
To delete a waypoint, press
FIND|↓ to MY WAYPOINTS|ENT. Sort your
waypoints by nearest or by name and press
ENT. Select a waypoint
from the waypoint list and press
ENT. Press → to DELETE WAYPOINT
|ENT|← to YES|ENT. To return to the main page display, press EXIT.