Filter
Top Products
60
GPS Data files:
GPS Data Files contain waypoints, routes, trails and event marker
icons. Instructions for copying GPS Data Files between your computer
and an MMC are contained in the instruction manual for your MMC
card reader and MapCreate 6 software.
GPS data automatically recorded in the unit's internal memory must
be saved to the MMC (as a GPS Data File) in order to store it on your
computer. GPS Data Files stored on an MMC must be copied from the
card to the iFINDER's internal memory before the unit can read them.
1. Insert the MMC card into your unit. Press
MENU|MENU|↓ to SYSTEM
SETUP|ENT|↓ to TRANSFER MY DATA|ENT.
To transfer data from the iFINDER to the MMC, press
ENT.
To transfer data from the MMC to the iFINDER, press → to
LOAD|ENT.
2. Saving to MMC: If you want to rename the file, press
ENT to acti-
vate the File Name selection box. Press ↑ or ↓ to change the first char-
acter, then press → to the next character and repeat until the name is
correct. Press
ENT|↓ to SAVE DATA|ENT. To accept the default name
Data for the GPS Data File, press ↓ to
SAVE|ENT.
The unit will display a completion message when the data transfer is
finished. To return to the main page display, press
EXIT repeatedly.
3. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT to activate the User
Data File selection box. Use ↓ or ↑ to highlight the file you want to
load, then press
ENT. Next, press ↓ to LOAD|ENT. The unit will display a
completion message when the data transfer is finished. To return to the
main page display, press
EXIT repeatedly.
Utilities
Utilities are useful tools for traveling or for outdoor activities.
Sun/Moon Calculation
To access the Sun/Moon Calculation menu, press
MENU|MENU|↓ to
UTILITIES|ENT|ENT.